3D printed TWOTANKS
Posted: Sat Aug 29, 2020 12:07 am
Hey guys, been a while since I posted here. Anyways, I 3D printed TwoTanks on an Ender 3 Pro ($200 3D printer). The quality was set to max and I had to modify the map a little for supports, but otherwise turned out pretty good! 
Here are the Pics...
https://imgur.com/a/cmMHgSk
and Ill supply the STL files as well. Load them up into a slicer such as CURA and tweak the setting for your 3D printer. Enjoy! Also I should add that some platforms need to be thickened more, such as the round one in the middle, or maybe scale it up vertically as that will also make the whole map pop out some more. Print time was about 22 hours. I would also make the tanks removable next time so that I can clean the supports out from under them.
Here are the Pics...https://imgur.com/a/cmMHgSk
and Ill supply the STL files as well. Load them up into a slicer such as CURA and tweak the setting for your 3D printer. Enjoy! Also I should add that some platforms need to be thickened more, such as the round one in the middle, or maybe scale it up vertically as that will also make the whole map pop out some more. Print time was about 22 hours. I would also make the tanks removable next time so that I can clean the supports out from under them.
that's so cool!!