212.195.201.196 -->funny maps<--

lddw · Post by **lddw** » Mon Jun 27, 2005 6:42 pm

admin:
lddw

e-mail adress:
lddw@club-internet.fr

* about 100 flags
* 10 shoots (at this time)
* 4 teams

SERVER POLICIES ::
"Please, don't cheat and be polite"

optic delusion · Post by **optic delusion** » Mon Jun 27, 2005 8:06 pm

Are you Mac, Windows, or Linux?
I'd be glad to help, but only if your MAC.

RPG · Post by **RPG** » Mon Jun 27, 2005 10:15 pm

A-Delusion wrote:Are you Mac, Windows, or Linux?
I'd be glad to help, but only if your MAC.

I dont think he needed help on anything

optic delusion · Post by **optic delusion** » Mon Jun 27, 2005 10:31 pm

well.. yknow.... it was his second ever post. just trying to be helpful.

lddw · Post by **lddw** » Tue Jun 28, 2005 9:24 am

I'm an teenager, so it's a little bit difficult for me to do it. English isn't my native language so... I need help.

And I want to use Windows for my server

lddw · Post by **lddw** » Tue Jun 28, 2005 9:26 am

Is it the same for Windows and for Mac to make a server?

optic delusion · Post by **optic delusion** » Tue Jun 28, 2005 11:17 am

The conf file is exactly the same on all computers. The programs you use to work with the conf are different.
This is something a freind of mine, SirPants, made. He made it for windows, then added the mac part at my request. Hope it helps.

My experience is 100 percent mac. As far as I'm concerned, any computer running windows should be sent to the recycling center, NOW!

You should fill out your profile, How old are you, exactly?

lddw · Post by **lddw** » Tue Jun 28, 2005 11:32 am

I'm 14 1/2 year old.

Euh, what mean fill out my profile

optic delusion · Post by **optic delusion** » Tue Jun 28, 2005 11:40 am

See just below any post you make, theres a little box that says profile.
It doesn't hurt if you put a little more info in there.

In the U.S.A. it's illegal to have you here if you are under 13 Y.O.

lddw · Post by **lddw** » Tue Jun 28, 2005 12:34 pm

Ok I have done it.

lddw · Post by **lddw** » Tue Jun 28, 2005 12:37 pm

So, I have done the map, the conf file and post this topic. What have I to do for my server now?
What do you think?

optic delusion · Post by **optic delusion** » Tue Jun 28, 2005 12:51 pm

It looks like you have not downloaded SirPants help file.
Please do so, above. There's lots of good stuff in there.

There is not much else here either.
I'll have to find it in your other posts.

Your map seems OK.
Can you post your conf?
It'll allow me to see exctly where you are, and where you should go.

optic delusion · Post by **optic delusion** » Tue Jun 28, 2005 12:56 pm

Download the file I posted earlier!

Creating A Server Mac&Windows.zip

lddw · Post by **lddw** » Tue Jun 28, 2005 1:48 pm

Ok.
Sorry, I didn't red your file...

Here is my conf file

I had already done what was written in your file.
I can go on my own server, but how to make it be public... I don't know

Guest · Post by **Guest** » Tue Jun 28, 2005 1:56 pm

I have alos made a help guide for making servers, but its really for Mac only.
However, in it, I explain how to make a server public.
Here is the relevant bit, although it is a little bit out of context...

To get the server running PUBLICALLY you need to edit the following things in the conf file:

i. Change "# -p [PORT]" to "-p PORT" where "PORT" is the port you have open on your router and/or firewall. For help with this, see http://www.PortForward.com

ii. Change "# -publicaddr address[:port]" to "-publicaddr YOUR-IP/DOMAIN:PORT" where "YOUR-IP/DOMAIN" is either you'r external IP or the URL you have pointing to it. For help pointing an url to your Ip, see http://www.dyndns.org or http://www.no-ip.com.

iii. Change "# -public * Yay. I got my server on the public list!" to "-public YOURMESSAGE" where YOURMESSAGE is what you want to appear next to your IP/URL on thepublic server list.

iv. If the above 3 things still don't get you on the list, you may be behind some kind of proxy. To solve this, change "# -publiclist http://my.BZFlag.org:81/db/" to "-publiclist http://my.BZFlag.org:81/db/".

The rest of the info is at http://my.bzflag.org/bb/viewtopic.php?t=3940
Hope that helps.

optic delusion · Post by **optic delusion** » Tue Jun 28, 2005 2:04 pm

There are four debug levels, you must use exactly one of them. Uncomment the single -d --remove the #

otherwise it looks ok for a private server

Going public is another entire set of problems, right now I'll have to say I'll get back to you. But you must enter your IP into the conf.

and next time you post your conf. be sure to remove your password.

---Edited
CBG, STOP FINISHING MY SENTENCES FOR ME! YOUR BEATING ME TO MY OWN POSTS!

lddw · Post by **lddw** » Tue Jun 28, 2005 2:23 pm

lddw · Post by **lddw** » Tue Jun 28, 2005 2:45 pm

Ok thanks

Guest · Post by **Guest** » Tue Jun 28, 2005 3:23 pm

A-Delusion wrote:CBG, STOP FINISHING MY SENTENCES FOR ME! YOUR BEATING ME TO MY OWN POSTS!

Aww, ya spoil all my fun.

lddw · Post by **lddw** » Tue Jun 28, 2005 7:46 pm

A-Delusion, could you help me for a server on a mac?

optic delusion · Post by **optic delusion** » Tue Jun 28, 2005 8:21 pm

CBG and I work together. we will help you. Just slow down.

Your not giving us enough or correct information.
First it's windows, now it's mac.
I can tell you're more confused now than when you started.
Making a server public is not something that should be taken lightly, it's a big step!
I suggest you study what you have, for awhile.
Read alot more, make some decisions, then make another post.
We will be waiting for you.

Guest · Post by **Guest** » Tue Jun 28, 2005 8:38 pm

Deulsion: That is true... but you know what they say: You can't cross a chasm in two small jumps...

Okay - ignore that. Do what delusion said.
Also, download my Mac Guide. It is specific for Mac so everything in there will be relevant to you.

BinarySpike · Post by **BinarySpike** » Tue Jun 28, 2005 11:49 pm

PM, AIM, or BW.

I'll help Windows or mac.
(sorry, don't know a think about linux)

My BW (BitWise, www.bitwiseim.com) is BinarySpike

My AIM is iBinarySpike.

I've set up a Windows and Mac server and know how to do it on both.
(BASH on windows too... but not on mac, I use tcsh for mac)

lddw · Post by **lddw** » Wed Jun 29, 2005 8:06 am

I've red your mac guide. The server is running.

in the terminal ,it's written:
"Running a public server with the following settings:
public address is hey:5154
LIBCURL: libcurl/7.13.1 OpenSSL/0.9.7b zlib/1.2.2
CURLOPT_FILETIME error: 2
curl_easy_perform() error: 28
Loaded master ban list from http://bzflag.org/master-bans.txt
listening on 0.0.0.0:5154
with title of "I got my server on the public list""

So does it mean my server is now public?

In the list of servers, its written my-conputer-name.lan
I don'tt find my server in the public list.

optic delusion · Post by **optic delusion** » Wed Jun 29, 2005 11:28 am

Until you see this at the end of your terminal, its not public.

Player [0] accept() from 69.28.129.166:41626 on 7
Player [0] removed at 2005-06-29 07:13:35: Disconnected
Player [0] accept() from 217.157.132.92:29921 on 7
Player [0] removed at 2005-06-29 07:14:32: Disconnected

This is the listservers signing on and gathering info about your server.
Another way to check is to open your BZFlag client and read the server list

This....copied from your post...isn't a very bad problem. The server should run despite it.
CURLOPT_FILETIME error: 2
curl_easy_perform() error: 28

Official forums for BZFlag.org

212.195.201.196 -->funny maps<--

212.195.201.196 -->funny maps<--

Mac Windows Linux?

Re: Mac Windows Linux?

well...

but...

mostly

old enough

I dont see any of that

CBG and Pants

Re: CBG and Pants

Me and CBG are a team.

The listserver