Page 1 of 2
Ubuntu 11.10 64 bit bzflag 2.4.0
Posted: Sat Oct 15, 2011 6:47 pm
by fox in the fog
I already compiled bzflag version 2.4.0 on ubuntu 11.04
Now there's the new version of Ubuntu 11.10 and so i installed it and it works just fine. Now, I just want to compile bzflag on my new OS but...
I read the readme.linux file and installed all the packages needed for debian & ubuntu. Than I also updated the system with a "sudo apt-get update & apt-get upgrade". After that, using the terminal i cd to the directory bzflag-2.4.0 (the extracted one and not the tar.bz2 I downloaded. I added different images on data folder (orbit's textures) and edited the scoreboard.cxx source (as blast suggest me) to remove the observer white line under the leader... Don't know If you understood correctly) than done that:
./configure
make
sudo make install
and the procedure don't seems to work:
at the end of the make command and the sudo make install command it says:
Code: Select all
Making all in common
make[2]: ingresso nella directory "/home/giorgio/bzflag-2.4.0/src/common"
source='AccessList.cxx' object='AccessList.lo' libtool=yes \
DEPDIR=.deps depmode=none /bin/bash ../../misc/depcomp \
/bin/bash ../../libtool --silent --tag=CXX --silent --mode=compile g++ -DHAVE_CONFIG_H -I. -I../../include -DINSTALL_DATA_DIR=\"/usr/local/share/bzflag\" -I../../src/other/zlib -I../../src/other/curl/include -c -o AccessList.lo AccessList.cxx
../../libtool: line 1153: g++: command not found
make[2]: *** [AccessList.lo] Errore 1
make[2]: uscita dalla directory "/home/giorgio/bzflag-2.4.0/src/common"
make[1]: *** [all-recursive] Errore 1
make[1]: uscita dalla directory "/home/giorgio/bzflag-2.4.0/src"
make: *** [all-recursive] Errore 1
after all, if i try to run the command "bzflag" it doesn't work. (the system says me that that program isn't installed and he suggest me to install the 2.0.16 version that's on the repositories)
my question is: could all that be caused by the fact i edited the data folder and the scoreboard.cxx file before the compiling?
Re: Ubuntu 11.10 64 bit bzflag 2.4.0
Posted: Sat Oct 15, 2011 7:10 pm
by Cobra_Fast
Code: Select all
../../libtool: line 1153: g++: command not found
Install the "g++" package.
Re: Ubuntu 11.10 64 bit bzflag 2.4.0
Posted: Sat Oct 15, 2011 9:07 pm
by fox in the fog
Code: Select all
giorgio@giorgio-F3JC:~$ g++
Il programma "g++" può essere trovato nei seguenti pacchetti:
* g++
* pentium-builder
Provare: sudo apt-get install <PACCHETTO SELEZIONATO>
The program g++ can be found in the following packages:
* g++
* pentium-builder
Try: sudo apt-get install <PACKAGE SELECTED>
in less worlds... Which one i have to install? The g++ i suppose, right?
thank you so much
Re: Ubuntu 11.10 64 bit bzflag 2.4.0
Posted: Sat Oct 15, 2011 10:47 pm
by blast
He said install the g++
package, so, what does that mean?
Re: Ubuntu 11.10 64 bit bzflag 2.4.0
Posted: Sun Oct 16, 2011 7:53 am
by fox in the fog
Right!
Thank you all mates... I love bzflag also for that great community
Re: Ubuntu 11.10 64 bit bzflag 2.4.0
Posted: Sun Oct 16, 2011 1:58 pm
by fox in the fog
F1 and F4 and wheel down for shot don't work... It seems to me i installed all the packages needed... I re-read the posts under
http://my.bzflag.org/bb/viewtopic.php?f=62&t=17477 and it seems to me I have to install SDL packages. Is that right?
Thank you so much
Re: Ubuntu 11.10 64 bit bzflag 2.4.0
Posted: Sun Oct 16, 2011 7:17 pm
by fox in the fog
SDL packages... Do I need the package build-essential?
sudo apt-get install build-essential
However that doesn't solve my problems :/
Re: Ubuntu 11.10 64 bit bzflag 2.4.0
Posted: Sun Oct 16, 2011 8:19 pm
by blast
Please read the Linux readme file.
Re: Ubuntu 11.10 64 bit bzflag 2.4.0
Posted: Mon Oct 17, 2011 1:02 pm
by fox in the fog
Both hardware and software rendering is supported. Hardware
rendering is highly recommended, as software rendering is very
slow. Hardware rendering is provided by the OpenGL drivers for
your video card. ATI and NVIDIA are the primary chipsets for video
cards in use today. Many Linux distributions to not ship with
video drivers that properly support hardware acceleration on
modern cards. Both ATI and NVIDIA provide Linux drivers for many
architectures on there websites. In general they provide greater
performance then the default drivers in many distributions.
I have understand that proprietary video cards driver are better than the default drivers in many OSs... Right? Well, I'm using NVIDIA now so, could not be better than that
Different Linux distributions use different naming conventions for the
packages that provide the dependencies needed to compile and run
BZFlag. Known requirements include:
Debian & Ubuntu:
libgl1-mesa-dev
libglu1-mesa-dev
libsdl1.2-dev
libcurl3-dev
libsdl-sound1.2-dev (may have to add this yourself as well)
In order to build bzrobot with python support, you will need:
python-dev
swig
I have installed all these packages...
What I have forgot?
Re: Ubuntu 11.10 64 bit bzflag 2.4.0
Posted: Tue Oct 18, 2011 2:42 am
by blast
Run the configure script again and rebuild. The configure script detects what libraries are available and adjusts the makefiles accordingly.
Re: Ubuntu 11.10 64 bit bzflag 2.4.0
Posted: Tue Oct 18, 2011 1:00 pm
by fox in the fog
Uff... I have run the script configure again and than rebuild all but... The problems persists.
I have made 3 different files with output of "./configure" than of "make" and "sudo make install". I can attach them if needed
Re: Ubuntu 11.10 64 bit bzflag 2.4.0
Posted: Tue Oct 18, 2011 1:33 pm
by blast
Check the version string of the game client to see if it mentions SDL.
Re: Ubuntu 11.10 64 bit bzflag 2.4.0
Posted: Tue Oct 18, 2011 2:29 pm
by fox in the fog
Code: Select all
BZFlag client 2.4.0.20111016-STABLE-linux-gnu (protocol 0221) http://BZFlag.org/
Copyright (c) 1993-2011 Tim Riker
No SDL here... So?
Re: Ubuntu 11.10 64 bit bzflag 2.4.0
Posted: Tue Oct 18, 2011 3:21 pm
by Cobra_Fast
Do you see anything "SDL" in it? I don't.
Re: Ubuntu 11.10 64 bit bzflag 2.4.0
Posted: Tue Oct 18, 2011 3:38 pm
by fox in the fog
Do you see anything "SDL" in it?
No. And so I said "No SDL here"... I meant: "in that I can't see anything about SDL".
So, the solution is...?
Re: Ubuntu 11.10 64 bit bzflag 2.4.0
Posted: Tue Oct 18, 2011 4:02 pm
by fox in the fog
Could the installation of this package ( libsdl1.2debian-all ) solve all?
Re: Ubuntu 11.10 64 bit bzflag 2.4.0
Posted: Tue Oct 18, 2011 9:37 pm
by blast
Can you paste the output of the following command inside a
Code: Select all
block here?
dpkg -l 'libsdl*'
(That's a lowercase L where it has -l, in case you're wondering)
Re: Ubuntu 11.10 64 bit bzflag 2.4.0
Posted: Wed Oct 19, 2011 1:43 pm
by fox in the fog
Code: Select all
giorgio@giorgio-F3JC:~$ dpkg -l 'libsdl*'
Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
||/ Nome Versione Descrizione
+++-===========================-===========================-======================================================================
un libsdl-dev <nessuna> (nessuna descrizione disponibile)
ii libsdl-image1.2 1.2.10-2.1 image loading library for Simple DirectMedia Layer 1.2
un libsdl-perl <nessuna> (nessuna descrizione disponibile)
ii libsdl-sound1.2 1.0.3-3.1 Decoder of several sound file formats for SDL
ii libsdl-sound1.2-dev 1.0.3-3.1 Development files for SDL_sound
un libsdl0.11 <nessuna> (nessuna descrizione disponibile)
un libsdl0.11-dev <nessuna> (nessuna descrizione disponibile)
un libsdl1.0-dev <nessuna> (nessuna descrizione disponibile)
un libsdl1.1-dev <nessuna> (nessuna descrizione disponibile)
un libsdl1.2 <nessuna> (nessuna descrizione disponibile)
un libsdl1.2-all <nessuna> (nessuna descrizione disponibile)
un libsdl1.2-arts <nessuna> (nessuna descrizione disponibile)
ii libsdl1.2-dev 1.2.14-6.1ubuntu4 Simple DirectMedia Layer development files
un libsdl1.2-esd <nessuna> (nessuna descrizione disponibile)
un libsdl1.2-oss <nessuna> (nessuna descrizione disponibile)
ii libsdl1.2debian 1.2.14-6.1ubuntu4 Simple DirectMedia Layer
un libsdl1.2debian-all <nessuna> (nessuna descrizione disponibile)
un libsdl1.2debian-alsa <nessuna> (nessuna descrizione disponibile)
un libsdl1.2debian-arts <nessuna> (nessuna descrizione disponibile)
un libsdl1.2debian-esd <nessuna> (nessuna descrizione disponibile)
un libsdl1.2debian-nas <nessuna> (nessuna descrizione disponibile)
un libsdl1.2debian-oss <nessuna> (nessuna descrizione disponibile)
ii libsdl1.2debian-pulseaudio 1.2.14-6.1ubuntu4 Simple DirectMedia Layer (with X11 and PulseAudio options)
giorgio@giorgio-F3JC:~$
Re: Ubuntu 11.10 64 bit bzflag 2.4.0
Posted: Wed Oct 19, 2011 10:57 pm
by blast
Hrm, that looks okay. It should be using SDL when it builds. I can't say I've tried recently, and definitely not on 11.10.
Re: Ubuntu 11.10 64 bit bzflag 2.4.0
Posted: Thu Oct 20, 2011 12:54 pm
by fox in the fog
And... What if I post that problem in the official ubuntu Italy forums? I have an account... They allow also posts about particular programs and they can understand better 11.10 mistakes.
Ah no... I think it's gonna be too much difficult. I should explain them all my problems in bz and probably this will be very long and confused.
Re: Ubuntu 11.10 64 bit bzflag 2.4.0
Posted: Thu Oct 20, 2011 4:08 pm
by fox in the fog
Fox in the Fog wrote:F1 and F4 and wheel down for shot don't work...
Also... I can't chat with players. I see the messages of other players and also mine messages I have sent, but other player can't
Re: Ubuntu 11.10 64 bit bzflag 2.4.0
Posted: Thu Oct 20, 2011 7:13 pm
by FangUp
Ah, so you are kinda half-connected?
The chat system may be disturbed if administrators used a "/set" command on the map.
If in your case that did not happen, there must be some sort of connection problem...also if the old version is connection and chat is ok, try to check your router...well you can not lose anything if you try (: (i do not know what you should look in certain but i think you will find out)
Re: Ubuntu 11.10 64 bit bzflag 2.4.0
Posted: Thu Oct 20, 2011 7:38 pm
by fox in the fog
Yeah in the previous version the chat worked... but also the wheel down and the iconify key!
So... I think is all caused just by the problems i'm having with compiling 2.4... Not connection problem
Re: Ubuntu 11.10 64 bit bzflag 2.4.0
Posted: Thu Oct 20, 2011 8:33 pm
by FangUp
just so lol....or its the new update not so well responding to Ubuntu?:D
Re: Ubuntu 11.10 64 bit bzflag 2.4.0
Posted: Fri Oct 21, 2011 1:56 am
by blast
It builds fine here from SVN.
sudo apt-get install aptitude
sudo aptitude install g++ libtool automake autoconf libgl1-mesa-dev libglu1-mesa-dev libsdl1.2-dev libcurl3-dev libc-ares-dev libsdl-sound1.2-dev libglew1.5-dev subversion
svn co https://bzflag.svn.sourceforge.net/svnroot/bzflag/trunk/bzflag/ bzflag-trunk
cd bzflag-trunk
./autogen.sh -v
./configure
Final output from configure:
Code: Select all
BZFlag-2.4.1.20111021 configured with the following:
Prefix: /usr/local
Binaries: /usr/local/bin
Plugins: /usr/local/lib/bzflag
Manual pages: /usr/local/share/man
CC = gcc
CXX = g++
CFLAGS = -Wall -W -Wundef -Wshadow -g -O2
CXXFLAGS = -Wall -W -Wundef -Wshadow -ansi -pedantic -fno-exceptions -g -O2
CPPFLAGS =
LDFLAGS =
LIBS = -lm -lpthread
Build ares ........: no (using system)
Build curl ........: no (using system)
Build glew ........: no (using system)
Build regex .......: no (using system)
Build zlib ........: no (using system)
BZFlag client .....: yes (with SDL)
BZFlag server .....: yes (with plugins)
BZAdmin client ....: yes
---
./configure complete, type 'make' to begin building
make -j3
sudo make install
bzflag
Note that for 'make' I'm assuming a dual-core system. If you're on a single-core system, just do 'make' without the -j3. If you're on a quad-core, do -j5. For all others, well, do the math.