after /configure; make
after /configure; make
what is the next step after /configure; make when doing cvs? or is it done now (didnt have any errors i dont think) here is what is said
../regex/.libs/libregex.a(regcomp.o) definition of _regcomp in section (__TEXT,__text)
/usr/lib/libm.dylib(regcomp.So) definition of _regcomp
ld: warning multiple definitions of symbol _regexec
../regex/.libs/libregex.a(regexec.o) definition of _regexec in section (__TEXT,__text)
/usr/lib/libm.dylib(regexec.So) definition of _regexec
ld: warning multiple definitions of symbol _regfree
../regex/.libs/libregex.a(regfree.o) definition of _regfree in section (__TEXT,__text)
/usr/lib/libm.dylib(regfree.So) definition of _regfree
make[2]: Nothing to be done for `all-am'.
make[1]: Nothing to be done for `all-am'.
[removed-names-Computer:~/cvs/bzflag]
../regex/.libs/libregex.a(regcomp.o) definition of _regcomp in section (__TEXT,__text)
/usr/lib/libm.dylib(regcomp.So) definition of _regcomp
ld: warning multiple definitions of symbol _regexec
../regex/.libs/libregex.a(regexec.o) definition of _regexec in section (__TEXT,__text)
/usr/lib/libm.dylib(regexec.So) definition of _regexec
ld: warning multiple definitions of symbol _regfree
../regex/.libs/libregex.a(regfree.o) definition of _regfree in section (__TEXT,__text)
/usr/lib/libm.dylib(regfree.So) definition of _regfree
make[2]: Nothing to be done for `all-am'.
make[1]: Nothing to be done for `all-am'.
[removed-names-Computer:~/cvs/bzflag]
MONKEYPANTS.COM
thats just the end output after i do /configure; make, does it mean that its done or what?
i also used the instructions found here
http://my.bzflag.org/bb/viewtopic.php?t=1751
but would those instructions give me the 2.0.x versions or the 2.1 versions?
i also used the instructions found here
http://my.bzflag.org/bb/viewtopic.php?t=1751
but would those instructions give me the 2.0.x versions or the 2.1 versions?
MONKEYPANTS.COM
- A Meteorite
- Private First Class
- Posts: 1786
- Joined: Thu Apr 28, 2005 12:56 am
- Location: California, U.S.
- Contact:
You need to get CVS using:
That way you don't get v2.1.
Code: Select all
cvs -z3 -d:pserver:anonymous@cvs.sourceforge.net:/cvsroot/bzflag co -r v2_0branch bzflag
Owner @ BZFX
Core Admin @ CAN
Email me: bzmet…@gmail.com
- A Meteorite
- Private First Class
- Posts: 1786
- Joined: Thu Apr 28, 2005 12:56 am
- Location: California, U.S.
- Contact:
I would delete the old ones to be on the safe side.
EDIT:
I have to go to bed... I can start following up tomorrow. So no real-time help.
EDIT:
I have to go to bed... I can start following up tomorrow. So no real-time help.
Owner @ BZFX
Core Admin @ CAN
Email me: bzmet…@gmail.com
ok this is the error i get now when i type this in
[name-Computer:~/cvs] spencerl% cvs -d:pserver:anonymous@cvs.sourceforge.net:/cvsroot/bzflag login
(Logging in to anonymous@cvs.sourceforge.net)
CVS password:
[name-Computer:~/cvs] spencerl% cvs -z3 -d:pserver:anonymous@cvs.sourceforge.net:/cvsroot/bzflag co -r v2_0branch bzflag
cvs checkout: in directory bzflag:
cvs checkout: cannot open CVS/Entries for reading: No such file or directory
cvs [checkout aborted]: cannot open CVS/Tag: No such file or directory
[name-Computer:~/cvs] spencerl% cvs -d:pserver:anonymous@cvs.sourceforge.net:/cvsroot/bzflag login
(Logging in to anonymous@cvs.sourceforge.net)
CVS password:
[name-Computer:~/cvs] spencerl% cvs -z3 -d:pserver:anonymous@cvs.sourceforge.net:/cvsroot/bzflag co -r v2_0branch bzflag
cvs checkout: in directory bzflag:
cvs checkout: cannot open CVS/Entries for reading: No such file or directory
cvs [checkout aborted]: cannot open CVS/Tag: No such file or directory
MONKEYPANTS.COM
- A Meteorite
- Private First Class
- Posts: 1786
- Joined: Thu Apr 28, 2005 12:56 am
- Location: California, U.S.
- Contact:
Totally wipe the CVS directory and start over. It should be working so that's my only guess.
(use the command I gave you just login first)
(use the command I gave you just login first)
Owner @ BZFX
Core Admin @ CAN
Email me: bzmet…@gmail.com
If you've grabbed a new source, do the following to clean out the stuff from the old one.
If not much has changed, you can just run make again.
If a lot has changed, run "make clean", then "./configure" then "make".
Once you've finished making it, type (as super user, aka root) "make install"
If you want BZFlag to install to a non-default directory (the default is: /usr/share/games/bzflag/shock.wav or /usr/local/share/bzflag/shock.wav, I can't tell, they both look the same) you need to specify that with ./configure --prefix=/opt/bzflag (which is where I put 2.0 now that I have 2.1 installed in the default directory, this requires typing in /opt/bzflag/bin/bzflag but it allows you to have 2 versions on the same system.
If not much has changed, you can just run make again.
If a lot has changed, run "make clean", then "./configure" then "make".
Once you've finished making it, type (as super user, aka root) "make install"
If you want BZFlag to install to a non-default directory (the default is: /usr/share/games/bzflag/shock.wav or /usr/local/share/bzflag/shock.wav, I can't tell, they both look the same) you need to specify that with ./configure --prefix=/opt/bzflag (which is where I put 2.0 now that I have 2.1 installed in the default directory, this requires typing in /opt/bzflag/bin/bzflag but it allows you to have 2 versions on the same system.
this is what i get when i do "make install"
[name-Computer:~/cvs/bzflag] spencerl% make install
Making install in data
Making install in l10n
make[3]: Nothing to be done for `install-exec-am'.
/bin/sh ../../misc/mkinstalldirs /usr/local/share/bzflag/l10n
mkdir -p -- /usr/local/share/bzflag/l10n
mkdir: /usr/local/share: Permission denied
make[3]: *** [install-data-local] Error 1
make[2]: *** [install-am] Error 2
make[1]: *** [install-recursive] Error 1
make: *** [install-recursive] Error 1
[name-Computer:~/cvs/bzflag] spencerl%
[name-Computer:~/cvs/bzflag] spencerl% make install
Making install in data
Making install in l10n
make[3]: Nothing to be done for `install-exec-am'.
/bin/sh ../../misc/mkinstalldirs /usr/local/share/bzflag/l10n
mkdir -p -- /usr/local/share/bzflag/l10n
mkdir: /usr/local/share: Permission denied
make[3]: *** [install-data-local] Error 1
make[2]: *** [install-am] Error 2
make[1]: *** [install-recursive] Error 1
make: *** [install-recursive] Error 1
[name-Computer:~/cvs/bzflag] spencerl%
MONKEYPANTS.COM
ok so now bzflag, bzadmin, and bzfs are in my folder /usr/local/bin but i can only get to them through terminal, and when i try to load bzflag using ./bzflag it says no fonts found try using -directory, whats that mean?
also how would i create a disk image file (dmg)? or is that not possible with cvs?
also how would i create a disk image file (dmg)? or is that not possible with cvs?
MONKEYPANTS.COM
oh, you are on a mac.
dude you don't want to do make install, that is for linux and other unix systems. OSX uses a difrent way.
what you want to do is use the xcode project to have it build the game into a .app package then run that.
No, the build system dosn't make a dmg automaticly, you use the disk utility to do that.
If you are just trying to get a 2.0.5 for OSX, I made one a while ago. If you need a newer one I can rebuild.
Building a package set on the mac is not trivial, and does take a number of manual steps
dude you don't want to do make install, that is for linux and other unix systems. OSX uses a difrent way.
what you want to do is use the xcode project to have it build the game into a .app package then run that.
No, the build system dosn't make a dmg automaticly, you use the disk utility to do that.
If you are just trying to get a 2.0.5 for OSX, I made one a while ago. If you need a newer one I can rebuild.
Building a package set on the mac is not trivial, and does take a number of manual steps
JeffM
ah ok, well the linux way worked its just to access it i have to cd to /usr/local/bin and then run bzfs like normal or bzflag but i need the path to the font directory.
would someone explain how to build in xcode? i have the program i just don't know what to do exactly, pm please if you know how...
would someone explain how to build in xcode? i have the program i just don't know what to do exactly, pm please if you know how...
MONKEYPANTS.COM